BEML is a highly diversified company operating in the manufacturing of Defence equipments, Mining & Construction equipments and Rail & Metro sectors and `Make In India’ is a big boost to us. 

BEML recognizes outsourcing as one of the strategic tools to achieve cost benefits and also complement the strengths of private sector to build a strong industrial base. BEML is well on its journey to become a system integrator by outsourcing a substantial part of manufacturing activities from Indian vendors, enabling BEML to enhance the capacity, attain cost effectiveness and improve competitiveness in the global market. As a policy BEML is not making any capital investments where facilities are available in the Indian industry.

To facilitate outsourcing, the company has well established policies, procedures and guidelines.

  • BEML has a Vendor Development Cell to work as a single window help desk for new vendors.
  • New vendors can register through Online / Manual.
  • New vendors are supported by way of imparting knowledge on manufacturing processes, specifications, quality plans, etc.
  • BEML also extends its testing facilities to its vendors wherever required.
  • To attract new vendors, BEML resorts to publishing of Expression of Interest periodically, participation in all vendor development programs organized by MSMEs, CII, FICCI and other agencies.
  • To enhance transparency in all its procurement processes, BEML has well established eProcurement Portal.

BEML has set up ‘Make in India’ Display Centre at our facility in Bangalore Complex, New Thippasandra, Bangalore – 560075, where prospective vendors can have access to samples, drawings and technical specifications. Interested vendors can visit the facility to explore opportunities to partner with BEML.

BEML LIMITED has been making continuous efforts in indigenising its product range and has achieved the same to a greater extent, truly depicting the Company’s commitment to Govt., policy on ‘Make in India’ concept.

POWER TAKE OFF ASSEMBLY

Product developed based on Reverse Engineering Based on the expertise available, Design / Drawings prepared
Material specification is based on the sample
Features
Power rating : 55 kW
Input: One
Output: Two (Hydraulic & Shaft)

FUEL INJECTION PUMP

Features
High pressure pump- P Type
Rated power: 300kW@1800 rpm
Maximum torque: 1830 Nm @ 1200 rpm
High idle speed: 2100±50 r/Min
Low idle speed: 550±50 r/Min
Emission compliance for EURO-II

BEML Equipments designed & made in India

Defence

  • Smerch 10×10
  • Sarvatra Bridge System

Mining & Construction

  • BH205E – Dump Truck
  • BE1800E – Electrical Excavator
  • BL120H – Loader cum Excavator

Rail & Metro

  • Stainless Steel EMU
  • Overhead Inspection Car

TRANSMISSION CONTROL VALVE

Features:
Intricate castings were developed successfully in record time and the assembly was tested at BEML and all characteristics were matched with that of the imported unit. Subsequently engineered on the transmission and further the unit is working on customer machine successfully for more than 500 hours.Further indigenous units are manufactured after the successful testing at site and positive feed back.

TRANSMISSION CONTROL VALVE

Features:
Intricate castings were developed successfully in record time and the assembly was tested at BEML and all characteristics were matched with that of the imported unit. Subsequently engineered on the transmission and further the unit is working on customer machine successfully for more than 500 hours.Further indigenous units are manufactured after the successful testing at site and positive feed back.

BH100 DUMP TRUCK TRANSMISSION

Unified Electronic Controller (UEC) performs multiple functions and provides single point control of a dump truck including recording of productivity data with advanced diagnostics. UEC is designed to cater to all major functions like automated gear shifting, on board weighing, hoist control and vehicle monitoring system of off highway dump truck. The Electronic module is based on Field Programmable Gate Array (FPGA) technique is jointly developed with Electronic Research & Development Center of India, to develop state-of-the-art mechatronics system with a view to enhance vehicle safety and operator’s comfort and ensure optimum loading and higher productivity.

STEERING & BRAKE CONTROLLER

To meet the customer requirement, for the first time in India, BEML has Designed & Developed “Electronically operated proportional steering and brake control system for crawler dozers”.

The equipment has been tested thoroughly to meet the performance requirements of different customers and at different terrain conditions for optimized performance.
The control valve assembly components are designed keeping in view ease of manufacturability and serviceability.

All the components viz., joysticks, controllers, and cartridge valves are standard components and are readily available from reputed sources globally.

BULK HEAD PANEL FOR METRO CARS

Made up of Aluminum frame, Aluminum honeycomb, Aluminum laminates skin
Features :
Excellent stiffness & Mechanical strength.
Good appearance & Better workability.
Good Impact resistance & fatigue Resistance.
Smooth & Flat surface.
Optimum strength to Weight Ratio.
Optimum stiffness to Weight Ratio.

An entity is considered to be working towards innovation, development, deployment or commercialization of new products, processes or services driven by technology or intellectual property if it aims to develop and commercialize:
  • A new product or service or process, or
  • A significantly improved existing product or service or process, that will create or add value for customers or workflow.
Provided that the mere act of developing:
  • Products or services or processes which do not have potential for commercialization, or
  • Undifferentiated products or services or processes, or
  • Products or services or processes with no or limited incremental value for customers or workflow would not be covered under this definition.
Entity means a private limited company (as defined in the Companies Act, 2013), or a registered partnership firm (registered under section 59 of the Partnership Act, 1932) or a limited liability partnership (under the Limited Liability Partnership Act, 2002). – (For details of startup refer www.startupindia.gov.in)

BEML has relaxed the following eligibility criteria for registration from Start Ups in order to encourage the StartUps to participate in supplies for BEML procurements.

  • Prior Turnover
  • Prior Experience may be relaxed

Start up is a Company that has been in existence for less than five years and with sales revenues not exceeding Rs 25 crore. Apart from innovation, such startups will be expected to be engaged in the development, deployment or commercialisation of new products, processes or services driven by technology or intellectual property.

BEML has identified areas of START UP which has been displayed in BEML WEBSITE under separate Start-up tab. Vendors need to follow the Vendor registration procedure by downloading the applicable formats, from the Company’s website and to register themselves by submitting duly filled formats to Corporate Quality and after the technical discussion and clearance from R&D about their Core skills in Design and Manufacturing for Start up activities.

Startup’s advances up to 15% may be considered if request is received by BEML against Bank Guarantee. The interest on the advance amount is not to be insisted from Startup’s.